Tape Applications

Now Plastics has been supplying the tape industry for approximately 20 years, with high quality films that allow for trouble free coating of adhesive and production of a varity of tapes.
 
Widths and put-up can be customized to your wishes.
 
Films which are available  are as follows:
 
BOPP:
         Thickness-15 micron (0.6 mil) to 75 micron (3 mil)
              Treatment - flame treatment and corona treatment at no upcharge
              Standard Haze - at 25 micron (1 mil) it is 2%
              Superclear Haze - at 25 micron (1 mil) it is 0.6%
              Elongation - standard elongation at 170 to 200%; low elongation now 
                                        available down to 150% providing higher tensile properties
              Splices - less than 5% of rolls will have one splice
              Roll lengths - outside diameters to approximately 30"
              Colors - clear, tan, white, and other colors available, subject to minimum  
                             production quantities
 
PET:
             
           Thickness - 12 micron (48 gauge) to 50 micron (2 mil)
           Treatment - as specified, can be none, one side or two sides corona  
                                         treatment
              Haze - standard 2% to 3% depending on thickness
            Splices - less than 5% of rolls will have one splice
            Roll lengths - outside diameters to approximately 30" (36,000   
                                             meters/120,000 feet maximum)
 
S-PVC: (suspension PVC)
    Thickness - 20 micron (0.8 mil) to 100 micron (4 mil)
    
Colors - clear and specific color matches available
   
Splices - less than 10% of rolls will have one slice
    
Roll lengths - outside diameters up to 28" approximately
 
E-PVC: (emulsion PVC)
    Thickness - 32 micron (1.3 mil) to 150 micron (6 mil)
    Colors - milky white (natural) and customized colors available
    Splices - less than 10% of rolls will have splice
    Roll lengths - outside diameters up to 28" approximately
 
MOPP: (mono-oriented PP)
          
               Thickness - 26 micron (1.05) to 100 micron (4 mil) 
           
Treatment - one or two sides corona treatment avaiable
           
Colors - natural and most any color can be matched (subject to minimum  
                                  production quantities)
          
Other specifications to be discussed as necessary
 

 


   

 

All Content © 2006 - 2018 by Now Plastics

Site design and hosting by Right Angle, Inc.